| Column Name | Column Data Type |
|---|
filters Input Column
An optional specification to return a subset of query logging associations. If you submit a second or subsequent ListResolverQueryLogConfigAssociations request and specify the NextToken parameter, you must use the same values for Filters, if any, as in the previous request. | STRUCT(
"name" VARCHAR,
"values" VARCHAR[]
)[] |
Show child fields- filters[]
Show child fields- filters[].name
The name of the parameter that you want to use to filter objects. The valid values for Name depend on the action that you're including the filter in, ListResolverEndpoints, ListResolverRules, ListResolverRuleAssociations, ListResolverQueryLogConfigs, or ListResolverQueryLogConfigAssociations. In early versions of Resolver, values for Name were listed as uppercase, with underscore (_) delimiters. For example, CreatorRequestId was originally listed as CREATOR_REQUEST_ID. Uppercase values for Name are still supported. ListResolverEndpoints Valid values for Name include the following: -
CreatorRequestId: The value that you specified when you created the Resolver endpoint. -
Direction: Whether you want to return inbound or outbound Resolver endpoints. If you specify DIRECTION for Name, specify INBOUND or OUTBOUND for Values. -
HostVPCId: The ID of the VPC that inbound DNS queries pass through on the way from your network to your VPCs in a region, or the VPC that outbound queries pass through on the way from your VPCs to your network. In a CreateResolverEndpoint request, SubnetId indirectly identifies the VPC. In a GetResolverEndpoint request, the VPC ID for a Resolver endpoint is returned in the HostVPCId element. -
IpAddressCount: The number of IP addresses that you have associated with the Resolver endpoint. -
Name: The name of the Resolver endpoint. -
SecurityGroupIds: The IDs of the VPC security groups that you specified when you created the Resolver endpoint. -
Status: The status of the Resolver endpoint. If you specify Status for Name, specify one of the following status codes for Values: CREATING, OPERATIONAL, UPDATING, AUTO_RECOVERING, ACTION_NEEDED, or DELETING. For more information, see Status in ResolverEndpoint. ListResolverRules Valid values for Name include the following: -
CreatorRequestId: The value that you specified when you created the Resolver rule. -
DomainName: The domain name for which Resolver is forwarding DNS queries to your network. In the value that you specify for Values, include a trailing dot (.) after the domain name. For example, if the domain name is example.com, specify the following value. Note the "." after com: example.com. -
Name: The name of the Resolver rule. -
ResolverEndpointId: The ID of the Resolver endpoint that the Resolver rule is associated with. You can filter on the Resolver endpoint only for rules that have a value of FORWARD for RuleType. -
Status: The status of the Resolver rule. If you specify Status for Name, specify one of the following status codes for Values: COMPLETE, DELETING, UPDATING, or FAILED. -
Type: The type of the Resolver rule. If you specify TYPE for Name, specify FORWARD or SYSTEM for Values. ListResolverRuleAssociations Valid values for Name include the following: -
Name: The name of the Resolver rule association. -
ResolverRuleId: The ID of the Resolver rule that is associated with one or more VPCs. -
Status: The status of the Resolver rule association. If you specify Status for Name, specify one of the following status codes for Values: CREATING, COMPLETE, DELETING, or FAILED. -
VPCId: The ID of the VPC that the Resolver rule is associated with. ListResolverQueryLogConfigs Valid values for Name include the following: -
Arn: The ARN for the query logging configuration. -
AssociationCount: The number of VPCs that are associated with the query logging configuration. -
CreationTime: The date and time that the query logging configuration was created, in Unix time format and Coordinated Universal Time (UTC). -
CreatorRequestId: A unique string that identifies the request that created the query logging configuration. -
Destination: The Amazon Web Services service that you want to forward query logs to. Valid values include the following: -
S3 -
CloudWatchLogs -
KinesisFirehose -
DestinationArn: The ARN of the location that Resolver is sending query logs to. This value can be the ARN for an S3 bucket, a CloudWatch Logs log group, or a Kinesis Data Firehose delivery stream. -
Id: The ID of the query logging configuration -
Name: The name of the query logging configuration -
OwnerId: The Amazon Web Services account ID for the account that created the query logging configuration. -
ShareStatus: An indication of whether the query logging configuration is shared with other Amazon Web Services accounts, or was shared with the current account by another Amazon Web Services account. Valid values include: NOT_SHARED, SHARED_WITH_ME, or SHARED_BY_ME. -
Status: The status of the query logging configuration. If you specify Status for Name, specify the applicable status code for Values: CREATING, CREATED, DELETING, or FAILED. For more information, see Status. ListResolverQueryLogConfigAssociations Valid values for Name include the following: -
CreationTime: The date and time that the VPC was associated with the query logging configuration, in Unix time format and Coordinated Universal Time (UTC). -
Error: If the value of Status is FAILED, specify the cause: DESTINATION_NOT_FOUND or ACCESS_DENIED. -
Id: The ID of the query logging association. -
ResolverQueryLogConfigId: The ID of the query logging configuration that a VPC is associated with. -
ResourceId: The ID of the Amazon VPC that is associated with the query logging configuration. -
Status: The status of the query logging association. If you specify Status for Name, specify the applicable status code for Values: CREATING, CREATED, DELETING, or FAILED. For more information, see Status. - filters[].values[]
|
sort_by Input Column
The element that you want Resolver to sort query logging associations by. If you submit a second or subsequent ListResolverQueryLogConfigAssociations request and specify the NextToken parameter, you must use the same value for SortBy, if any, as in the previous request. Valid values include the following elements: -
CreationTime: The ID of the query logging association. -
Error: If the value of Status is FAILED, the value of Error indicates the cause: -
DESTINATION_NOT_FOUND: The specified destination (for example, an Amazon S3 bucket) was deleted. -
ACCESS_DENIED: Permissions don't allow sending logs to the destination. If Status is a value other than FAILED, ERROR is null. -
Id: The ID of the query logging association -
ResolverQueryLogConfigId: The ID of the query logging configuration -
ResourceId: The ID of the VPC that is associated with the query logging configuration -
Status: The current status of the configuration. Valid values include the following: -
CREATING: Resolver is creating an association between an Amazon VPC and a query logging configuration. -
CREATED: The association between an Amazon VPC and a query logging configuration was successfully created. Resolver is logging queries that originate in the specified VPC. -
DELETING: Resolver is deleting this query logging association. -
FAILED: Resolver either couldn't create or couldn't delete the query logging association. Here are two common causes: -
The specified destination (for example, an Amazon S3 bucket) was deleted. -
Permissions don't allow sending logs to the destination. | VARCHAR |
sort_order Input Column
If you specified a value for SortBy, the order that you want query logging associations to be listed in, ASCENDING or DESCENDING. If you submit a second or subsequent ListResolverQueryLogConfigAssociations request and specify the NextToken parameter, you must use the same value for SortOrder, if any, as in the previous request. | VARCHAR |
_aws_profile Input Column
The AWS profile defines the AWS identity used. It can be defined via credentials or by assuming a IAM role. | STRUCT(
"type" VARCHAR,
"name" VARCHAR,
"account_id" VARCHAR,
"via_profile_name" VARCHAR,
"assumed_role_arn" VARCHAR,
"organization" STRUCT(
"account_name" VARCHAR,
"id" VARCHAR,
"tags" STRUCT(
"key" VARCHAR,
"value" VARCHAR
)[],
"master_account" STRUCT(
"id" VARCHAR,
"email" VARCHAR
),
"parents" STRUCT(
"type" VARCHAR,
"id" VARCHAR,
"name" VARCHAR,
"tags" STRUCT(
"key" VARCHAR,
"value" VARCHAR
)[]
)[]
)
) |
Show child fields- _aws_profile.account_id
The AWS account id - _aws_profile.assumed_role_arn
The ARN of the assumed role - _aws_profile.name
The unique name of the profile. - _aws_profile.organization
Information about this profile's membership in the AWS organization. Show child fields- _aws_profile.organization.account_name
The name of account speciifed by the organization - _aws_profile.organization.id
The organization id - _aws_profile.organization.master_account
Show child fields- _aws_profile.organization.master_account.email
The organization master account email address - _aws_profile.organization.master_account.id
The organization master account id
- _aws_profile.organization.parents[]
Show child fields- _aws_profile.organization.parents[].id
The id of the parent - _aws_profile.organization.parents[].name
The name of the parent - _aws_profile.organization.parents[].tags[]
Show child fields- _aws_profile.organization.parents[].tags[].key
- _aws_profile.organization.parents[].tags[].value
- _aws_profile.organization.parents[].type
The type of parent can be an organization unit or a root
- _aws_profile.organization.tags[]
Show child fields- _aws_profile.organization.tags[].key
- _aws_profile.organization.tags[].value
- _aws_profile.type
The type of profile, either 'credentials' or 'assumed_role' - _aws_profile.via_profile_name
This IAM role for this profile is assumed by first utilizing another profile with this name to obtain credentials.
|
_aws_region Input Column
The AWS region to use. | VARCHAR |
resolver_query_log_config_associations
A list that contains one ResolverQueryLogConfigAssociations element for each query logging association that matches the values that you specified for Filter. | STRUCT(
"id" VARCHAR,
"resolver_query_log_config_id" VARCHAR,
"resource_id" VARCHAR,
"status" VARCHAR,
"error" VARCHAR,
"error_message" VARCHAR,
"creation_time" VARCHAR
)[] |
Show child fields- resolver_query_log_config_associations[]
Show child fields- resolver_query_log_config_associations[].creation_time
The date and time that the VPC was associated with the query logging configuration, in Unix time format and Coordinated Universal Time (UTC). - resolver_query_log_config_associations[].error
If the value of Status is FAILED, the value of Error indicates the cause: -
DESTINATION_NOT_FOUND: The specified destination (for example, an Amazon S3 bucket) was deleted. -
ACCESS_DENIED: Permissions don't allow sending logs to the destination. If the value of Status is a value other than FAILED, Error is null. - resolver_query_log_config_associations[].error_message
Contains additional information about the error. If the value or Error is null, the value of ErrorMessage also is null. - resolver_query_log_config_associations[].id
The ID of the query logging association. - resolver_query_log_config_associations[].resolver_query_log_config_id
The ID of the query logging configuration that a VPC is associated with. - resolver_query_log_config_associations[].resource_id
The ID of the Amazon VPC that is associated with the query logging configuration. - resolver_query_log_config_associations[].status
The status of the specified query logging association. Valid values include the following: -
CREATING: Resolver is creating an association between an Amazon VPC and a query logging configuration. -
CREATED: The association between an Amazon VPC and a query logging configuration was successfully created. Resolver is logging queries that originate in the specified VPC. -
DELETING: Resolver is deleting this query logging association. -
FAILED: Resolver either couldn't create or couldn't delete the query logging association.
|
total_count
The total number of query logging associations that were created by the current account in the specified Region. This count can differ from the number of associations that are returned in a ListResolverQueryLogConfigAssociations response, depending on the values that you specify in the request. | BIGINT |
total_filtered_count
The total number of query logging associations that were created by the current account in the specified Region and that match the filters that were specified in the ListResolverQueryLogConfigAssociations request. For the total number of associations that were created by the current account in the specified Region, see TotalCount. | BIGINT |